Advertisement
Front and Main retract
The nose gear unit comes pre-
assembled. In case you did not dis-
assemble it for painting, ensure that all
parts are secure and tight before
installation.
Attach the steering servo frame to the
nose unit with the M3 dome head screw
supplied and fit the servo
using the M3 x 10 allen bolts supplied.
Using the 30mm M3 threaded rod
supplied make up the steering pushrod
with M3 ball link and M3 clevis as
shown. Install the linkage on a diagonal
plane as shown in order to achieve good
throws and no issues with retracting /
extending the gear. Fit the 4mm air lines
supplied to the nose gear unit and
install in the fuselage using the large
self tapping screws supplied.
Advertisement
