HOME
HEADLIGHT SUPPORT BRACKET
REMOVAL
1.
Remove seat. See
2.38
11
1
WARNING
To protect against accidental start-up of vehicle and pos-
sible personal injury, disconnect the negative battery
cable before proceeding. Inadequate safety precautions
could cause a battery explosion, which could result in
death or serious injury.
2.
Disconnect battery by unthreading fastener removing
negative cable (black) from battery first. See
TERY MAINTENANCE.
3.
Remove front fairing. See
SHIELD, AND
MIRRORS.
4.
See
Figure 2-91.
Disconnect flasher (1) and bank angle
sensor (2). Remove electronic control module fasteners
(3).
5.
See
Figure 2-93.
Rotate headlamp support bracket.
a.
Loosen headlamp pivot fasteners (1).
b.
Rotate headlight bracket (2) down.
6.
See
Figure 2-92.
Disconnect headlight connection.
7.
Disconnect and remove electronic control module. See
4.29 ELECTRONIC CONTROL
8.
See
Figure 2-93.
Remove headlight support bracket (2).
SEAT.
WARNING
1.4 BAT-
2.37 FRONT FAIRING, WIND-
MODULE.
8428
6775
1
1.
Flasher
2.
Bank angle sensor
3.
Electronic control module
Figure 2-91. Headlight Support Bracket
8470
Figure 2-92. Headlight Connector
2003 Buell XB9R: Chassis
2.25
3
2
2-59