Table of Contents
Advertisement
HOME
NOTE
In next step, be sure loops in cam position sensor and neutral
switch wiring are intact.
7.
Use cable strap (5) to secure cam position sensor (1),
cam position sensor wiring (3), neutral switch connector
(4) and neutral switch connector wiring (6).
8.
See
Figure 7-84.
Connect vehicle speed sensor connec-
tor.
NOTE
See
Figure 7-85.
In next step, be sure main harness (4) is
routed around sprocket cover boss (2).
9.
See
Figure 7-85.
Connect voltage regulator connector
[77] (1). Be sure connector latch faces inward and volt-
age regulator wires are positioned behind other wires in
harness at sprocket cover boss (2).
10. Install cable strap (3) securing vehicle speed sensor wir-
ing to starter connector [128] wiring.
11. Install cable strap (5) securing main harness wiring.
12. Install cable strap (6) securing stator, cam position sen-
sor and oil pressure switch wiring.
13. Add cable strap (7) to secure cam position sensor and
voltage regulator wiring.
8746
Figure 7-82. Neutral Switch Connector [131]
8747
3
2
1
1.
Cam position sensor connector [14]
2.
Neutral switch location
3.
Cam position sensor wiring
4.
Neutral switch connector [131]
5.
Cable strap
6.
Loop in neutral switch wiring
Figure 7-83. Neutral Switch Wiring
4
5
6
8749
Figure 7-84. Vehicle Speed Sensor Connector [65]
4
3
2
1
1.
Voltage regulator connector [77]
2.
Sprocket cover boss
3.
Cable strap
4.
Main harness
5.
Cable strap
6.
Cable strap
7.
Cable strap
Figure 7-85. Assembled Wiring
2003 Buell XB9R: Electrical
8748b
5
6
7
7-65
Advertisement
Table of Contents
Troubleshooting
