Transmission Sprocket Tightening - Buell XB9R 2003 Service Manual

HOME
INSTALLATION
1. See Figure 6-89. Install transmission sprocket (4) with
secondary drive belt onto main drive gear (5).
2. Place transmission in neutral.
3. Apply a few drops of LOCTITE 262 (red) to the left-hand
threads of transmission sprocket nut (3) and lightly coat
the washer-faced side with clean H-D 20W50 engine oil.
Wipe off any excess oil.
4. Position nut with washer-faced side facing transmission
sprocket. Turn the nut counterclockwise to install it onto
main drive gear.
8632
1
1. Sprocket holding tool (Part No. B-45659)
2. Mainshaft locknut wrench
(Part No. HD-94660-37B)
Figure 6-90. Transmission Sprocket Tightening
5. See Figure 6-90. Install SPROCKET HOLDING TOOL
(Part No. B-45659) as shown.
6. Using MAINSHAFT LOCKNUT WRENCH (Part No. HD-
94660-37B) and a torque wrench, tighten sprocket nut to
50 ft-lbs (67.8 Nm) INITIAL TORQUE ONLY.
6-48 2003 Buell XB9R: Drive/Transmission
2