Cylinder Head; Rocker Arm And Pushrod Cover Assemblies - Buell XB9R 2003 Service Manual

HOME

CYLINDER HEAD

CAUTION
All washers and fasteners used in the engine are hard-
ened. Do not mix or replace hardened washers and fas-
teners with unhardened parts. Do not reuse fiber cover
seals. Engine damage may result.
1. Crankcase breather
2. Grommet
3. Screw (4)
4. Washer (4)
5. Gasket (4)
6. Rocker cover (top)
7. Bolt (3)
8. Washer (3)
9. Gasket (inner)
10. Gasket (lower)
11. Rocker arm shafts
12. Bolt (2)
13. washer (2)
14. Rocker cover (lower)
15. Rocker arm (2)
16. Bushing (rocker arm - 4)
17. Gasket (lower rocker cover)
18. Hydraulic lifter
19. Screw, tappet anti-rotation (2)
20. Gasket (push rod cover)
21. Pushrod cover
22. Screw (4)
23. O-ring (push rod cover - 2)
24. Push rod
25. Washer (4)
26. Bolt (4)
19
26
25
24
23
22
21
20
18
Figure 3-62. Rocker Arm and Pushrod Cover Assemblies
REMOVAL
Before removing the cylinder head assembly, it is necessary
to rotate engine down as described in
TION FOR SERVICE. The rocker arm covers and internal
components must be removed before removing cylinder
heads.
2003 Buell XB9R: Engine
3.6
3.3 ENGINE ROTA-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
b0960x3x
3-45