Passenger; Remove Mount; Install Footpeg; Install Heel Guard - Buell XB9R 2003 Service Manual

HOME

PASSENGER

Remove Footpeg
1. See Figure 2-101. Remove e-ring (7).
2. Remove footpeg pin (9).
3. Remove footpeg (8), detent plate (6), ball (5) and
spring (4).
Remove Heel Guard
1. See Figure 2-101. Remove heel guard fasteners (1).
2. Remove heel guard (2).

Remove Mount

1. See Figure 2-101. Remove footpeg mount fasteners
(10).
2. Remove footpeg mount (3).

Install Footpeg

1. See Figure 2-101. Position footpeg (8), detent plate (6),
ball (5), and spring (4) on to footpeg mount (3).
2. Install footpeg pin (9).
3. Install e-ring (7).
4. Check that footpeg clicks in the up and down position.

Install Heel Guard

1. See Figure 2-101. Position heel guard (2) onto footpeg
mounts (3).
2. Install heel guard (2). Tightening heel guard fasteners to
48-72 in-lbs (5-8 Nm).
Install Mount
1. See Figure 2-101. Position footpeg mount (3) onto tail
frame.
2. Install footpeg mount (3). Using LOCTITE 272 tighten,
fasteners (10) to 25-28 ft-lbs (34-38 Nm).
b0933x2x
1
2
3
7
6
4
5
1. Heel guard fasteners
2. Heel guard
3. Footpeg mount
4. Spring
5. Ball
6. Detent plate
7. E-ring
8. Footpeg
9. Pin
10. Footpeg mount fastener
Figure 2-101. Passenger Footpeg, Mount and Heel Guard
Assembly
2003 Buell XB9R: Chassis
10
9
8
2-69