IEI Technology TANK-XM810 Series User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Desktop
  5. TANK-XM810 Series
  6. User manual

IEI Technology TANK-XM810 Series User Manual

Hide thumbs Also See for TANK-XM810 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL:
TANK-XM810 Series
Embedded System with 10th/11th Generation Intel® Core™ Processor,
Two DDR4 Slot, Digital I/O, HDMI, DP, Two Gigabit Ethernet, RS-232/422/485,
RoHS Compliant
User Manual
Rev. 1.00 – May 20, 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TANK-XM810 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology TANK-XM810 Series

Summary of Contents for IEI Technology TANK-XM810 Series

  • Page 1 MODEL: TANK-XM810 Series Embedded System with 10th/11th Generation Intel® Core™ Processor, Two DDR4 Slot, Digital I/O, HDMI, DP, Two Gigabit Ethernet, RS-232/422/485, RoHS Compliant User Manual Rev. 1.00 – May 20, 2022...
  • Page 2 TANK-XM810 Revisions Date Version Changes May 20, 2022 1.00 Initial release Page II...
  • Page 3 TANK-XM810 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 TANK-XM810 Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information.

  • Page 5: Table Of Contents

    TANK-XM810 Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 M ....................3 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 T ..................4 ECHNICAL PECIFICATIONS 1.5 F ......................6 RONT ANEL 1.6 R ....................... 7 ANEL 1.7 P ....................
  • Page 6 TANK-XM810 3.7 A ....................32 VAILABLE RIVERS 3.7.1 Driver Download ..................... 32 3.8 M ......................34 AINTENANCE 3.8.1 Flash Descriptor Security Override Jumper ............ 34 4 SYSTEM MOTHERBOARD ..................36 4.1 O ........................ 37 VERVIEW 4.1.1 Layout ......................37 4.2 I ..............
  • Page 7 TANK-XM810 C.1 PEI B ..................... 56 ODES C.2 DXE B ....................56 ODES D HAZARDOUS MATERIALS DISCLOSURE ............57 D.1 R HS II D (2015/863/EU) ............... 58 IRECTIVE D.2 C HS ......................59 HINA Page VII...
  • Page 8 TANK-XM810 List of Figures Figure 1-1: TANK-XM810 Series ....................2 Figure 1-2: Front Panel ........................6 Figure 1-3: Rear Panel ........................7 Figure 1-4: Physical Dimensions ....................8 Figure 3-1: Remove the Cover .....................18 Figure 3-2: Take out the motherboard ..................18 Figure 3-3: CPU Installation ......................19...
  • Page 9 TANK-XM810 Figure 4-3: Ethernet Connector ....................43 Page IX...
  • Page 10 TANK-XM810 List of Tables Table 1-1: TANK-XM810 Series Model Variations ............... 3 Table 1-2: Technical Specifications ....................5 Table 3-1: Digital I/O Connector Pinouts ..................25 Table 3-2: RJ-45 Ethernet Connector LEDs ................27 Table 3-3: RS-232 (COM1~COM4) & RS-232/422/485 (COM5~COM6) Connector Pinouts ..28 Table 3-4: Power LED Indicators Description ................31...

  • Page 11: Introduction

    TANK-XM810 Chapter Introduction Page 1...

  • Page 12: Overview

    Q470 chipset, and has two 260-pin DDR4 SDRAM SO-DIMM slots supporting up to 64GB memory (8GB preinstalled). The TANK-XM810 Series includes one digital I/O port, one HDMI, one DP, two GbE LAN, six USB 3.2 Gen 1, two USB 2.0, two RS-232/422/485 and four RS-232 connectors.

  • Page 13: Model Variations

    TANK-XM810 1.2 Model Variations The model variations of the TANK-XM810 Series are listed below. Model No. Intel® Core™ i3-10320 3.8GHz TANK-XM810-i3BC-R10 (up to 4.6GHz, 4-core, TDP 65W) Intel® Core™ i3-10320 3.8GHz TANK-XM810-i5AC-R10 (up to 4.6GHz, 4-core, TDP 65W) Intel® Core™ i5-10500 3.1GHz TANK-XM810-i5BC-R10 (up to 4.5GHz, 6-core, TDP 65W)

  • Page 14: Technical Specifications

    TANK-XM810 1.4 Technical Specifications The TANK-XM810 Series technical specifications are listed in Table 1-2 Specifications Chassis Color Black C Dimensions (WxDxH) (mm) 230.6 x 256.04 x 76.2 System Fan Fanless Chassis Construction Extruded aluminum alloy Motherboard 10/11th Gen. Intel® Core™ CPU: Intel®...

  • Page 15: Table 1-2: Technical Specifications

    TANK-XM810 Specifications Expansions 2 x 2280 M key (PCIe x2) Backplane Optional Power DC jack: 12 V~28 V DC Power Input Terminal block: 12 V~28 V DC Power Consumption 12V @ 8.8A (Intel ® Core™ i9-12900TE with 16GB memory) Remote Power 1 x 2-pin Reliability Mounting...

  • Page 16: Front Panel

    TANK-XM810 1.5 Front Panel The front panel of the TANK-XM810 Series has the following features (Figure 1-2): Figure 1-2: Front Panel Page 6...

  • Page 17: Rear Panel

    TANK-XM810 1.6 Rear Panel The rear panel of the TANK-XM810 Series is shown below. Figure 1-3: Rear Panel Page 7...

  • Page 18: Physical Dimensions

    TANK-XM810 1.7 Physical Dimensions The physical dimensions of the TANK-XM810 are shown in Figure 1-4. 507H Figure 1-4: Physical Dimensions Page 8...

  • Page 19: Unpacking

    TANK-XM810 Chapter Unpacking Page 9...

  • Page 20: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TANK-XM810 Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TANK-XM810 Series or any other electrical component is handled, the following anti-static precautions are strictly adhered to.

  • Page 21: Unpacking Checklist

    If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the TANK-XM810 Series from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@ieiworld.com.
  • Page 22 TANK-XM810 Quantity Item and Part Number Image Standard 2-pin Terminal block 4-pin Terminal block Chassis screws The following table lists the optional items that can be purchased separately. Optional Wi-Fi module (P/N: EMB-WIFI-KIT02I3-R10) Page 12...
  • Page 23 TANK-XM810 Optional Power adapter (P/N: 63040-010180-200-RSSS) Power cord (P/N: 32000-000002-RS) 8-Port POE LAN Card (P/N: GPOE-XM81-8P-R10) M.2 & PCIe Mini expansion card (P/N: GPOE-XM81-8P-R10) 2-Slot Backplane (PCIe x16 & PCIe x4) (P/N: TXCBP-XM81-2A-R10) 2-Slot Backplane (Two PCIe x8) (P/N: TXCBP-XM81-2B-R10)ss Page 13...
  • Page 24 TANK-XM810 Optional 4-Slot Backplane (PCIe x16 & Two PCIe x4 & PCIe x1) (P/N: TXCBP-XM81-4A-R10) 4-Slot Backplane (Two PCIe x8 & Two PCIe x4) (P/N: TXCBP-XM81-4B-R10) 4-Slot Backplane (PCIe x16 & PCIe x4 & Two PCI) (P/N: TXCBP-XM81-4C-R10) 4-Slot Backplane (PCIe x16 & Two PCIe x4 & PCIe x1) (P/N: TXCBP-XM81-G1-PW-R10) 4-Slot Backplane (Two PCIe x8 &...
  • Page 25 TANK-XM810 Optional 3-Slot Chassis (P/N: TXC-XM81-3S-R10) 4-Slot Chassis (P/N: TXC-XM81-4S-R10) 4-Slot Chassis (Full-length graphics card support) (P/N: TXC-XM81-G1-R10) 6-Slot Chassis (Two Full-length graphics card support) (P/N: TXC-XM81-G2-R10) NOTE: 1.EMB-WIFI-KIT02I3-R10 needs to be used with TXIOB-XM81-A-R10. 2.TXCBP-XM81 series backplane needs to be used with TXC-XM81 series chassis Page 15...

  • Page 26: Installation

    TANK-XM810 Chapter Installation Page 16...

  • Page 27: Installation Precautions

    Electric shock and personal injury might occur if the rear panel of the TANK-XM810 Series is opened while the power cord is still connected to an electrical outlet.

  • Page 28: Cpu /Ram/ Storage Installation

    TANK-XM810 3.2 CPU /RAM/ Storage Installation To install the CPU /RAM/ Storage, please follow the steps below: Step 1: Remove the 6 screws on the side, and then remove the top cover (Figure 3-1). Figure 3-1: Remove the Cover Step 2: Remove the 11 spring screws on the motherboard, and then take out the motherboard (including the motherboard holder) (Figure 3-2).

  • Page 29: Figure 3-3: Cpu Installation

    TANK-XM810 Figure 3-3: CPU Installation Step 4: Place a thermal pad on the heat conductive block of CPU (Figure 3-4). Figure 3-4: CPU Thermal Pad Installation Step 5: Align the motherboard (together with the motherboard holder) with the 4 positioning rods on the 2 sides, place it on the heat sink, and lock the motherboard with 11 spring screws.

  • Page 30: Figure 3-5: Motherboard Installation

    TANK-XM810 Figure 3-5: Motherboard Installation Step 6: Insert the memory into the motherboard memory slot and press it into place(Figure 3-6) Figure 3-6: RAM Installation Step 7: Remove the M.2 2280 reserved screws, install the M.2 2280 NVME card, and re-lock the fixing screws (Figure 3-7) Page 20...

  • Page 31: Figure 3-7: M.2 Installation

    TANK-XM810 Figure 3-7: M.2 Installation Step 8: Place the hard drive into the hard drive bracket and secure the HDD bracket and the hard drive with four screws (Figure 3-8) Page 21...

  • Page 32: Mounting The System With Mounting Brackets

    TANK-XM810 Figure 3-8: HDD Installation Step 9: Install the back cover. And lock the 6 screws on the side (Figure 3-9) Figure 3-9: Back Cover Installation 3.3 Mounting the System with Mounting Brackets To mount the embedded system onto a wall or some other surface using the two mounting brackets, please follow the steps below.

  • Page 33: External Peripheral Interface Connectors

    Insert four retention screws, three in each bracket, to secure the system to the wall. 3.4 External Peripheral Interface Connectors The TANK-XM810 Series has the following connectors. Detailed descriptions of the connectors can be found in the subsections below. ...

  • Page 34: At/Atx Power Mode Selection

    RS-232/422/485  3.4.1 AT/ATX Power Mode Selection The TANK-XM810 Series supports AT and ATX power modes. The setting can be made through the AT/ATX power mode switch on the external peripheral interface panel as shown below (Figure 3-11).. Figure 3-11: AT/ATX Power Mode Switch 3.4.2 SYS_FAN Connector...

  • Page 35: Digital Input / Output Connector

    TANK-XM810 Figure 3-12: SYS_FAN Connector 3.4.3 Digital Input / Output Connector The digital I/O connector provides programmable input and output for external devices. The pinouts for the digital I/O connector are listed in the table below (Table 3-1) (Figure 3-13). PIN NO.

  • Page 36: Hdmi/Dp Connector

    Figure 3-16. Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the TANK-XM810 Series. See Figure 3-15. Figure 3-15: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector.

  • Page 37: Power Input, 4-Pin Terminal Block

    TANK-XM810 Figure 3-16: RJ-45 Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked. See Table 3-2 Activity/Link LED Speed LED DESCRIPTION STATUS...

  • Page 38: Rs-232/422/485 Serial Port Connectors

    TANK-XM810 Figure 3-18: Power Input Connector 3.4.8 DB-9 RS-232/422/485 Serial Port Connectors The system has two RS-232/422/485 & four RS232 serial port connectors. The pinouts for the serial ports are listed in the table below (Table 3-3) (Figure 3-19). PIN NO. RS232 RS422 RS485...

  • Page 39: Remote Power Connector

    TANK-XM810 3.4.9 Remote Power Connector This remote power switch connector can be connected to an external switch for remote control of power on and off (Figure 3-20) Figure 3-20: Remote Power Connector 3.5 Powering On/Off the System WARNING: Make sure a power supply with the correct input voltage is being fed into the system.

  • Page 40: Power

    TANK-XM810 Figure 3-21: Power Button 3.6 Power There are two power connectors on the rear panel. Power 1 connector is a 4-pin terminal block that supports ACC On signal. Power 2 connector is a DIN connector that can directly connect to a power adapter. The supported power input voltages are: ...

  • Page 41: Figure 3-22: Power Connectors

    TANK-XM810 Figure 3-22: Power Connectors LED Indicator Description Standby mode. Power LED1 (Breathing Orange) Power-on mode. Power LED2 (Solid blue) Table 3-4: Power LED Indicators Description NOTE: The power LED turns off when the power cable is unplugged from the system.

  • Page 42: Available Drivers

    TANK-XM810 3.7 Available Drivers All the drivers for the TANK-XM810 Series are available on IEI Resource Download Center (https://download.ieiworld.com). Type TANK-XM810 Series and press Enter to find all the relevant software, utilities, and documentation. Figure 3-23: IEI Resource Download Center 3.7.1 Driver Download...
  • Page 43 TANK-XM810 Step 3: Click the driver file name on the page and you will be prompted with the  following window. You can download the entire ISO file ( ), or click the small  arrow to find an individual driver and click the file name to download ( NOTE: To install software from the downloaded ISO image file in Windows 10 (or later), double-click the ISO file to mount it as a virtual drive to view...

  • Page 44: Maintenance

    TANK-XM810 3.8 Maintenance To configure the jumper settings, please follow the steps below. Step 1: Remove the top cover. See Figure 3-2. Step 2: Locate the jumper on the embedded motherboard. Step 3: Make the jumper settings in accordance with the settings described and defined in the following sections.
  • Page 45 TANK-XM810 Step 1: Before turning on the system power, short the Flash Descriptor Security Override jumper. Step 2: Update the BIOS and ME firmware, and then turn off the system power. Step 3: Remove the metal clip on the Flash Descriptor Security Override jumper or return to its default setting (open).

  • Page 46: System Motherboard

    TANK-XM810 Chapter System Motherboard Page 36...

  • Page 47: Overview

    TANK-XM810 4.1 Overview This chapter details all the jumpers and connectors of the system motherboard. 4.1.1 Layout The figures below show all the connectors and jumpers of the system motherboard. Figure 4-1: System Motherboard (Front) Page 37...

  • Page 48: Figure 4-2: System Motherboard (Rear)

    TANK-XM810 Figure 4-2: System Motherboard (Rear) Page 38...

  • Page 49: Internal Peripheral Connectors

    TANK-XM810 4.2 Internal Peripheral Connectors The table below shows a list of the internal peripheral interface connectors on the system motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label Clear CMOS Switch 4-pin Switch J_CMOS1 Battery connector 2-pin header...

  • Page 50: Clear Cmos Switch (J_Cmos1)

    TANK-XM810 4.2.1 Clear CMOS Switch (J_CMOS1) PIN NO. DESCRIPTION Open Normal Operation (Default) Push Clear CMOS Setup Table 4-2: Clear CMOS Switch (J_CMOS1) 4.2.2 SMBUS Connector (J_AT_ATX1) PIN NO. DESCRIPTION Short 1 - 2 ATX Mode (default) Short 2- 3 AT Mode Table 4-3: AT/ATX Mode Switch (J_AT_ATX1) 4.2.3 BIOS Programming Connector (JSPI1)

  • Page 51: Ec Programmer Connector (Ec_Spi1)

    TANK-XM810 4.2.5 EC Programmer Connector (EC_SPI1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION EC_SPI_CS#_R +V3.3A_EC EC_SPI_MISO_R EC_DET_FLASH EC_SPI_CLK_R EC_SPI_MOSI_R Table 4-6: EC Programmer Connector ( J_SPI1 ) 4.2.6 EC UART Debug (EC_UART1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DEBUG_UART_TX +V3.3A_EC DEBUG_UART_RX Table 4-7: EC UART Debug Connector (EC_UART1) 4.2.7 EC Debug Card Connector (DBG1_SPI1) PIN NO.

  • Page 52: Lan Led Connector (Led_Lan1/Led_Lan2/Led_Lan3)

    TANK-XM810 4.2.9 LAN LED Connector (LED_LAN1/LED_LAN2/LED_LAN3) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC3V Table 4-10: LAN LED Connector 4.2.10 Battery Connector (BAT1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VBATT Table 4-11: Battery Connector (BAT1) 4.3 External Interface Panel Connectors The table below shows a list of the external interface panel connectors on the system motherboard.

  • Page 53: Lan Connectors

    TANK-XM810 Connector Type Label RS-232 connector DB-9 COM1, COM2, COM3, COM4 SYS_FAN connector 4-pin box header SYS_FAN Digital I/O connector DB-15 Remote Power connector 2-pin terminal block Remote Power Table 4-12: Rear Panel Connectors 4.3.1 LAN Connectors Description Description MDIA3- MDIA1+ MDIA3+ MDIA2+...

  • Page 54: Power Input Connector, Dc Jack (Pwr1)

    TANK-XM810 4.3.2 Power Input Connector, DC Jack (PWR1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DC_IN1 DC_IN1 Table 4-15: Power Input Connector (PWR1) 4.3.3 Power Input Connector, Terminal Block (PWR2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DC_IN2 DC_IN2 Table 4-16: Power Input Connector (PWR2) Page 44...

  • Page 55: A Regulatory Compliance

    TANK-XM810 Appendix Regulatory Compliance Page 45...
  • Page 56 TANK-XM810 DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive (2004/108/EC, 2014/30/EU)  Low-Voltage Directive (2006/95/EC, 2014/35/EU)  RoHS II Directive (2011/65/EU, 2015/863/EU) If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 57 TANK-XM810 Eesti [Estonian] IEI Integration Corp deklareerib seadme seadme vastavust direktiivi 2014/53/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Ελληνική...
  • Page 58 TANK-XM810 Magyar [Hungarian] IEI Integration Corp nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 2014/53/EU irányelv egyéb elõí rásainak. Polski [Polish] IEI Integration Corp oświadcza, że wyrobu jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EU. Português [Portuguese] IEI Integration Corp declara que este equipamento está...
  • Page 59 TANK-XM810 FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  This device must accept any interference received, including interference that may cause undesired operation.

  • Page 60: B Safety Precautions

    TANK-XM810 Appendix Safety Precautions Page 50...

  • Page 61: Safety Precautions

    WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the TANK-XM810 Series. Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.

  • Page 62: Anti-Static Precautions

    TANK-XM810 Series and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TANK-XM810 Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TANK-XM810 Series is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 63: Product Disposal

    The mark on electrical and electronic products only applies to the current European Union Member States. Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the TANK-XM810 Series, please follow the guidelines below. Page 53...

  • Page 64: Maintenance And Cleaning

    Some components in the TANK-XM810 Series may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the TANK-XM810 Series. ...

  • Page 65: C Error Beep Code

    TANK-XM810 Appendix Error Beep Code Page 55...

  • Page 66: Pei Beep Codes

    TANK-XM810 C.1 PEI Beep Codes Number of Beeps Description Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed Reset PPI is not available C.2 DXE Beep Codes Number of Beeps...

  • Page 67: D Hazardous Materials Disclosure

    TANK-XM810 Appendix Hazardous Materials Disclosure Page 57...

  • Page 68: Rohs Ii Directive (2015/863/Eu)

    TANK-XM810 D.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).

  • Page 69: China Rohs

    TANK-XM810 D.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的年 限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元件将 会单独标示出来。 部件名称 有毒有害物质或元素 壳体 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 59...

This manual is also suitable for:

Tank-xm810-i3bc-r10Tank-xm810-i5ac-r10Tank-xm810-i5bc-r10Tank-xm810-i7ac-r10Tank-xm810-i7bc-r10

Table of Contents