GeoVision GV-IP LPR Camera 5R User Manual page 94

condition comes first. For example, if the specified smallest amount of storage space
comes earlier than the designated keep days, then recycle is applied first.

Enable debug message to the storage: Select this option to store debug messages (log
information) to an inserted storage device.
 Enable auto formatting when disk or partition is enable to record: Select this option
for the camera to automatically format the storage device when there is error during
recording.
[Disk Information]
This section shows the details of the attached storage device. Use the Format/Remove
button to format or unload a storage device. For detail steps, see Partition Information below.
[Partition Information]
This section shows the partition details of the attached storage device.
To add a storage device:
1. Insert the storage device to the camera.
2. Click the Format button.
3. After the format is complete, the partition information will display. The maximum space for
one partition is 200 GB.
To remove a storage device:
1. Click the Remove button.
2. When you are prompted to ensure the action, click Yes. The page will be refreshed and
the partition information will be cleaned.
3. Remove the storage device from the camera.
86