GeoVision GV-IP LPR Camera 5R User Manual page 74

To enable connection to GV-Video Gateway / GV-Recording Server:
1. Activate Link: Enable the monitoring through GV-Video Gateway / GV-Recording Server.
2. Host Name or IP Address: Type the host name or IP address of the GV-Video Gateway /
GV-Recording Server.
3. Port Number: Match the communication port specified on GV-Video Gateway /
GV-Recording Server. Or keep the default value 50000.
4. User Name: Type a valid user name to log into GV-Video Gateway / GV-Recording
Server.
5. Password: Type a valid password to log into GV-Video Gateway / GV-Recording Server.
6. Click Apply. The Connection Status should display "Connected" and connected time.
7. To establish connection to the second GV-Video Gateway / GV-Recording Server, click
the Connection 2 tab and repeat the above steps for setup.
You can also find these options:
 Enable schedule mode: Starts the monitoring through GV-Video Gateway /
GV-Recording Server based on the schedule you set in the Select Schedule Time
section. For schedule setup, refer to 4.2.3 Center V2.
 Cease motion detection messages from: Stops notifying GV-Video Gateway /
GV-Recording Server of motion events.
66