GeoVision GV-IP LPR Camera 5R User Manual page 72

3. Port Number: Match the communication port on the GV-Backup Center or keep the
default value 30000.
4. User Name: Type a valid user name to log into the GV-Backup Center.
5. Password: Type a valid password to log into the GV-Backup Center.
6. Backup Video: Select the streams to back up their recordings to the GV-Backup Center.
7. Compact Video: Select the streams to only back up their Key Frames to the GV-Backup
Center, instead of full recordings. This option is useful to save the backup time.
8. Resend all files: Select this option to send all the recorded files that have received by the
Backup Center again.
9. Enable Schedule Mode: Enable the GV-Backup Center connection on the schedule you
set in the Select Schedule Time section. Refer to 4.4 Recording Schedule for the same
settings.
10. Click Apply. The Connection Status should display "Connected" and connected time.
If you have a failover GV-Backup Center server which provides uninterrupted backup services
in case the first GV-Backup Center failed, configure the failover GV-Backup Center as below.
1. Automatic Failover Support: Enable the automatic connection to the failover GV-Backup
Center once the connection between camera and the first GV-Backup Center is
interrupted.
2. Host Name or IP Address: Type the host name or IP address of the failover GV-Backup
Center.
3. Port Number: Match the communication port on the failover GV-Backup Center or keep
the default value 30000.
4. User Name: Type a valid user name to log into the failover GV-Backup Center.
5. Password: Type a valid password to log into the failover GV-Backup Center.
6. Click Apply.
64