GeoVision GV-IP LPR Camera 5R User Manual page 34

4. Select Static IP address or PPPoE and type the required network information.
5. Click Apply. The camera is now accessible by entering the assigned IP address on the
Web browser.
Important:
1. If your camera uses a public dynamic IP address via PPPoE, use the dynamic DNS
Service to obtain a domain name linked to the camera's changing IP address first. For
details on Dynamic IP Address and PPPoE, see 4.5.2 Advanced TCP/IP and 4.5.1 LAN
Configuration.
2. If PPPoE is enabled and you cannot access the camera, you may have to reset it to the
factory default and then perform the network settings again. To restore the factory
settings, see 5.3 Restoring to Factory Default Settings.
26