GeoVision GV-IP LPR Camera 5R User Manual page 55

[Video Slice Mode]
Select Single Slice if the camera is displayed on a third-party NVR/DVR software and the live
view is incomplete or broken. The default is Auto.
[Record Settings]
Note this function is not available for GV-Hybrid LPR Camera 10R. The alarm settings allow
you to capture images before and/or after the motion happens.

Pre-alarm recording time: Activate video recording before an event occurs. Set the
recording time to 1 or 2 seconds. The recording is saved in the buffer of the camera.

Post-alarm recording time: Activate video recording onto the inserted memory card
after an event occurs. Set the recording time from 1 to 30 seconds.

Split interval: Set the maximum time length of each recorded file from 1 to 5 minutes.

Continue recording to the local storage when live view is accessed: Select this
function for continuous recording to the memory card even when the live view is
accessed through the Web interface or other software. This option is enabled by default.
[Text Overlay Settings]

Overlaid with camera name: Include camera names on live and recorded videos.

Overlaid with date stamps: Include date stamps on live and recorded videos.

Overlaid with time stamps: Include time stamps on live and recorded videos.
[Watermark Setting]
Enable this option to watermark all recordings. The watermark allows you to verify whether
the video has been tampered while it was recorded. See 5.4 Verifying Watermark.
[TV Out]
Select the signal format for the video output of the camera as either NTSC or PAL. This
function is disabled by default. Note this function is not available for GV-IP LPR Camera 5R.
Note: For smooth live view display on TV monitor, the video resolution must be of 1280 x
1024 or lower. If dual streams are enabled, the sub stream must be set at 640 x 480.
4 Administrator Mode
47