Motion Detection - GeoVision GV-IP LPR Camera 5R User Manual

4.1.2 Motion Detection

Motion detection is used to generate an alarm whenever movement occurs within the scene.
You can configure up to 8 detection zones with different sensitivity values. Create at least one
detection zone to enable this function.
1. Select a sensitivity value using the slider bar. There are 10 sensitivity levels. The higher
the value, the more sensitive the camera is to motion. The default sensitivity value is 9.
2. Define a detection zone by dragging an area on the image. Click Add when you are
prompted to confirm the setting.
3. To create several areas with different sensitivity values, repeat Steps 1 and 2.
4. Click Save to save the above settings.
5. Click Reset to clear all the selected areas.
6. For the camera to ignore environmental changes such as rain or snow, select the Ignore
environmental changes.
7. To reduce video noise when the lighting condition changes, select Noise Tolerance.
8. Click the Apply button.
Figure 4-3
4
Administrator Mode
49