Tampering Alarm - GeoVision GV-IP LPR Camera 5R User Manual

4.1.5 Tampering Alarm

Note this function is not available for GV-IP LPR Camera 5R.
The Tampering Alarm is used to detect whether a camera is being physically tampered. An e-mail
alarm can be sent when the camera is moved, covered up, or out of focus. Make sure the e-mail
settings are set up. For detail, see 4.2.1 E-Mail.
To configure the tampering alarm:
1. Select the Enable option.
2. If you want the camera to ignore any movement or scene change in certain areas, click
the button to drag areas on the camera view.
3. Select the desired detection sensitivity by moving the slider. The higher the value, the
more sensitive the camera is to scene changes.
4. In the Tolerance Time of Alarm field, specify the time length allowed for scene changes
before an e-mail notification is sent.
52
Figure 4-7