Snmp Settings - GeoVision GV-IP LPR Camera 5R User Manual

4.5.4 SNMP Settings

The Simple Network Management Protocol (SNMP) allows you to monitor the status of the
GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 5R through SNMP network management
software.
To allow management of SNMP software:
1. Select Enable SNMPv1 SNMPv2c to enable the function.
2. To enable access to Read/Write Name, type a community string. This will serve as a
password to allow read and write access to the GV-Hybrid LPR Camera 10R / GV-IP LPR
Camera 5R from the SNMP software.
3. To enable Read Only Name, type a community string to allow read-only access to the
GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 5R from the SNMP software.
4. For a more secured connection, select Enable SNMPv3 to enable SNMP version 3.
5. To enable access to Read/Write Name, type a community string.
6. Select an Authentication Type to be used for SNMP requests.
Figure 4-21
4
Administrator Mode
79