Restoring To Factory Default Settings; Using The Web Interface; Directly On The Camera - GeoVision GV-IP LPR Camera 5R User Manual

5.3 Restoring to Factory Default Settings

To restore the factory default settings, you can use the camera's Web interface or operate

directly on the camera.

5.3.1 Using the Web Interface

For GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 5R, follow the steps below to restore
the factory default settings through the camera's Web interface.
1. In the left menu of the Web interface, Click Tools.
2. In System Settings field, click the Load Default button to restore the factory default
settings.
5.3.2 Directly on the Camera
For GV-IP LPR Camera 5R, you can alternatively press the default button inside the camera.
1. Keep the power and network cables connected to the camera.
2. Loosen the camera's cover and remove the Silica Gel Bag.
3. Press and hold the default button for 8 seconds.
4. Release the default button. When the process of loading default settings is completed, the
camera reboots automatically.
5. Insert a new Silica Gel Bag and fasten the camera's cover immediately.
102
Default Button