Remove Anti-Shaking Cushion
1.
Remove the plastic protective film from Front door.
2.
Remove "tape from door", then push firmly on the bottom right corner of the
front-door to open.
3.
Open door completely and remove the "anti-shaking" cushion (foam)"
4.
Pull out one drive tray at a time and fully re-seat it. (Drive 1 must stay with
slot 1, etc.) After all drives are re-seated, close door. [Push bottom right
corner of the door firmly until you hear a click.]
Figure 3. Remove Anti-Shaking Cushion from the enclosure
Installing the Software
The SmartNAVI software connects your Mac to the SmartStor, sets up the
SmartStor, sets up network drives on your Mac, and performs backups.
Installation
1.
Please double-click the SmartNAVI.dmg file to open and
install the disk of SmartNAVI Image.
2.
Click the SmartNAVI Image to open the folder.
Chapter 2: Installation and Setup
7