Promise Technology
Managing Network Connections
Making Virtual Management Port Settings
The VTrak D5000 subsystem has a virtual management port, enabling you to log into a VTrak D5000 with dual
controllers using one IP address.
You initially made these settings during subsystem setup. You can change them later as required.
To make virtual management port settings:
1. Click the Device tab.
2. Click the Network Management tab.
3. Under Floating IP, click on the gear icon and choose the Modify option.
4. In the new menu, make the following settings are needed:
•
Check the Enable DHCP box to enable a DHCP server to make
your network settings. DHCP is currently supported in IPv4 only.
Note that you will have the option to enable Auto DNS.
•
For manual network settings, type the RAID subsystem's IP address,
subnet mask and gateway IP address into the fields provided.
5. Click the Save button.
Caution
Changing virtual management port settings can interrupt your
WebPAM PROe connection and require you to log in again.
95
Management with WebPAM PROe