Table of Contents
Advertisement
(5) Maintenance Commands
This section provides information on how to use the maintenance command and its parameters using exam-
ples.
Adjusting the print start timing (alternative command for the maintenance mode U034)
Description
Adjusts the leading edge registration or left edge.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Make the adjustment if there is a regular error between the left edges of the copy image and original.
!R! KCFG"PFRC",#1 ,#2 ,#3;
Format
#1
Paper source number
Parameter
2-6 : Cassette2-6
100: Duplex (e.g. landscape images short-edge bind)
200: Rotated duplex (e.g. portrait images long-edge bind)
#2
Edge to adjust
#3
Adjustable range (-128 to +127)
Example: Set the leading edge of MP tray to +30 dots
!R! KCFG "PFRC",0,1,30;EXIT;
Leading edge registration
Correct image
Left edge of printing
Correct image
0: MP tray
1: Leading edge
2: Left edge
number of dot in 600dpi
Output
Output
example 1
example 2
Output
Output
example 1
example 2
2-4-13
2MH/2MJ/2MK/2ML-1
Advertisement
Table of Contents
