Table of Contents
Advertisement
Item No.
U600
Initializing all data
Description
Initializes software switches and all data in the backup data on the FAX control PWB, according
to the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes
the file system, communication past record and register setting contents.
Purpose
To initialize the FAX control PWB.
Method
1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the des-
tination code list on following for the destination code).
4. Press the start key.
There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.
5. Press the start key. Data initialization starts. To cancel data initialization, press the stop key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed.
A ROM version displays three kinds, application, boot, and IPL.
Destination code list
Code
000
009
038
080
084
088
097
108
126
136
137
152
156
159
169
181
242
243
Destination
Japan
Australia
China
Hong Kong
Indonesia
Israel
Korea
Malaysia
New Zealand
Peru
Philippines
Middle East
Singapore
South Africa
Thailand
U.S.A.
South America
Saudi Arabia
1-3-22
Description
Code
Destination
253
CTR21 (European nations)
Italy
Germany
Spain
U.K.
Netherlands
Sweden
France
Austria
Switzerland
Belgium
Denmark
Finland
Portugal
Ireland
Norway
254
Taiwan
2MH/2MJ/2MK/2ML
Advertisement
Table of Contents
