Table of Contents
Advertisement
Adjusting the scanner center line (alternative command for the maintenance mode U067)
Description
Adjusts the scanner center line of the original scanning.
Purpose
Make the adjustment if there is a regular error between the center lines of the copy image and original.
!R! KCFG "SCAN",6, #1;#2;EXIT;
Format
#1
1: Scanner center line
Parameter
2: Scanner center line of rotated scan
#2
#1=1: Adjustable range: -70 to 70 (in 0.086mm increment) (0: default)
#1=2: Adjustable range: -40 to 40 (in 0.086mm increment) (0: default)
Example: Scanner leading edge registration set to 20 to increase 1.72mm
!R! KCFG "SCAN",6,1,20;EXIT;
Scanner center line
Original
(within ± 2.0 mm)
Copy
Copy
example 1
example 2
2-4-16
2MH/2MJ/2MK/2ML-1
Advertisement
Table of Contents
