Kyocera FS-1030MPF Service Manual page 44

Item No.
U222 Setting the IC card type
Description
Sets the type of IC card.
Purpose
To change the type of IC card.
Setting
1. Press the start key.
2. Select the item using the cursor up/down keys.
Display
OTHER
SSFC
* : Initial setting: OTHER
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U250 Setting the maintenance cycle
Description
Displays, clears and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
1. Press the start key. The currently set maintenance cycle is displayed.
Setting
1. Select [M.CNT A] using the cursor up/down keys.
2. Change the setting using the cursor left/right keys or numeric keys.
Description
Maintenance cycle
3. Press the start key. The value is set.
Clearing
1. Select [CLEAR] using the cursor up/down keys.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
The type of IC card is SSFC.
The type of IC card is not SSFC.
Setting range
0 to 9999999
1-3-13
2MH/2MJ/2MK/2ML
Initial setting
100000