Table of Contents
Advertisement
Item No.
U002
Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the image scanner unit to the home position. (position in which the frame can be fixed).
Method
1. Press the start key.
2. Select [MODE1(ALL)] using the cursor up/down keys.
3. Press the start key.
The imege scanner returns to the home position.
4. Turn the power switch off and on.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn power switch off then on, and execute initialization using
maintenance item U002.
Error codes
Setting the machine number
U004
Description
Sets or displays the machine number.
Purpose
To check or set the machine number.
Method
1. Press the start key.
If the machine serial number of engine PWB matches with that of main PWB
Display
MACHINE No.
If the machine serial number of engine PWB does not match with that of main PWB
Display
MACHINE No. (MAIN)
MACHINE No. (ENG)
Setting
Carry out if the machine serial number does not match.
1. Press [EXECUTE].
2. Press the start key. Writing of serial No. starts.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Codes
Description
0001
Controller error
0020
Engine error
0040
Scanner error
Operation
Displays the machine serial number
Operation
Displays the machine serial number of main
Displays the machine serial number of engine
Description
1-3-11
2MH/2MJ/2MK/2ML
Advertisement
Table of Contents
