Table of Contents
Advertisement
Code
Duplex sensor non arrival
4301
jam
4302
4303
4308
4309
Duplex sensor stay jam
4311
4312
4313
4318
4319
No paper feed from DP
9000
DP original conveying jam
9001
DP original switchback jam
9003
9004
DP top cover open
9011
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-2).
Contents
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
1.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
2.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
3.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from duplex
section.
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from the MP
tray.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
1.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
2.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
3.
The eject sensor (ES) does not turn off after a
switchback start, during paper feed from duplex
section.
The duplex sensor (DUS) does not turn off after a
switchback start, during paper feed from the MP
tray.
DP timing sensor (DPTS) does not turn on during
original feed from DP (Retry 5 times).
DP timing sensor (DPTS) turns off within the speci-
fied time since the sensor turns on.
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn off within specified
time.
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn on within specified
time since original switchback operation starts.
The DP top cover is opened during original feed-
ing.
Conditions
1-4-5
2MH/2MJ/2MK/2ML-2
Jam
location*
G
G
G
G
G
F
F
F
F
F
H
H
H
H
H
Advertisement
Table of Contents
