Send Error Code; Scan To Smb Error Codes - Kyocera FS-1030MPF Service Manual

1-4-6 Send error code

This section describes the scanning errors and descriptions, preventive actions, as well as corrective actions.
Error codes not described here could fall within software errors.
If such an error is encountered, turn power off then on, and advise the service representative.

(1) Scan to SMB error codes

Code
1101 Host destined does not exist on the net-
work.
1102 Login to the host has failed.
1103 Destined host, folder, and/or file names
are invalid.
1105 SMB protocol is not enabled.
2101 Login to the host has failed.
2201 Writing scanned data has failed.
2203 No response from the host during a cer-
tain period of time.
Contents Check procedures/corrective measures
1. Confirm the destined host.
2. Confirm thedevice's network parameters.
3. Confirm the parameters of the network to which the
device is connected are correct.
1. Confirm user name and password.
2. Confirm the parameters of the network to which the
device is connected are correct.
3. Check the host if the folder is properly shared.
1. Check illegal characters are not contained within
these names.
2. Check the name of the folder and files conform with
the naming syntax.
3. Confirm destined host and folder.
1. Confirm device's SMB protocols.
1. Confirm the destined host.
2. Confirm that the LAN cable is properly connected to
the device.
3. Check the SMB port number.
4. Confirm the device's network parameters.
5. Confirm the parameters of the network to which the
device is connected are correct.
1. Check the file name to save the scanned data.
2. Confirm the device's network parameters.
3. Confirm the parameters of the network to which the
device is connected are correct.
1. Confirm the network parameters the device is con-
nected.
2. Confirm that the LAN cable is properly connected to
the device.
1-4-28
2MH/2MJ/2MK/2ML