Kyocera FS-1030MPF Service Manual page 113

Code
F000 Control PWB - Operation panel
PWB communication error
F020 Control PWB RAM checksum
error
F040 Control PWB engine communica-
tion error
A communication error is detected.
F041 Control PWB - scanner PWB com-
munication error
A communication error is detected.
F050 Control PWB engine checksum
error
F186 Control PWB video data control
error
Contents
Causes
Defective har- Reinsert the connector. Also check for
ness between continuity within the connector har-
operation panel ness. If none, remedy or replace the
PWB (YC1) and harness.
control PWB
(YC7), or
improper con-
nector insertion.
Defective opera- Replace the operation panel PWB.
tion panel PWB.
Defective control Replace the control PWB (See page 1-
PWB. 5-37).
Defective main Turn the power switch off/on to restart
memory (RAM) the machine. If the error is not resolved,
on the control replace control PWB (See page 1-5-37).
PWB.
Defective Replace the expanded memory
expanded mem- (DIMM).
ory (DIMM).
Defective control Turn the power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace control PWB (See page 1-5-37).
Defective control Turn the power switch off/on to restart
PWB or scanner the machine. If the error is not resolved,
PWB. replace control PWB or scanner PWB
(See page 1-5-37 or 1-5-47).
Some error may Download the firmware of the control
have occurred PWB again (See page 1-6-1).
when download-
ing the firmware
of the control
PWB.
Defective control Turn the power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace control PWB (See page 1-5-37).
Defective control Turn the power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace control PWB (See page 1-5-37).
1-4-16
2MH/2MJ/2MK/2ML
Remarks
Check procedures
/corrective measures