Kyocera FS-1030MPF Service Manual page 166

Installing the image scanner unit (ISU)
1. Peel off the protective seal on one side
from the FFC tape D.
2. Stick the FFC tape D on the ISU lower
frame, aligned with the marking of the
frame.
(Sticking standards: See right figure)
3. Peel off the protective seal on the other
side of the FFC tape A.
4. Stick the FFC tape A on the ISU lower
frame.
(At the right for how to correctly sick the
tape in position, see the figure.)
5. Fix the ferrite core onto the FFC.
ISU lower frame
FFC tape A
Ferrite core
FFC
1-5-25
2MH/2MJ/2MK/2ML
FFC tape A
FFC tape D
Marking
Pit
FFC tape D
a
a: 0 to 1 mm
Pit
Figure 1-5-36
Figure 1-5-37
Marking
a
a