Table of Contents
Advertisement
Item No.
U332
Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Let-
ter size.
Setting
1. Press the start key.
2. Change the setting using the cursor left/right keys or numeric keys.
Display
CALC.RATE
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U345
Setting the value for maintenance due indication
Description
Sets when to display a message notifying that the time for maintenance is about to be reached,
by setting the number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the
maintenance count reaches the set value, the message is displayed.
Purpose
To change the time for maintenance due indication.
Setting
1. Press the start key.
2. Select [COUNT] using the cursor up/down keys.
3. Change the setting using the cursor left/right keys.
Description
Time for maintenance due indication
(Remaining number of copies that can be made
before the current maintenance cycle ends)
4. Press the start key. The value is set.
Clearing
1. Select [CLEAR] using the cursor up/down keys.
2. Press the start key. The value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Size parameter
1-3-17
2MH/2MJ/2MK/2ML
Setting range
Initial setting
0.1 to 3.0
1.0
Setting range
Initial setting
0 to 9999
0
Advertisement
Table of Contents
