Kyocera FS-1030MPF Service Manual page 137

Error code
A DCN or other inappropriate signal was received during standby for DIS signal recep-
U01040
tion.
A DCN signal was received after transmission of a DNL (MPS or EOM) signal (between
U01041
units of our make).
A DCN signal was received after transmission of a DCS, TCF signal.
U01042
A DCN signal was received after transmission of an NSS1, NSS2 (TCF) signal (between
U01043
units of our make).
A DCN signal was received after transmission of an NSS3, TCF signal (between units of
U01044
our make).
A DCN or other inappropriate signal was received after transmission of an MPS signal.
U01045
A DCN or other inappropriate signal was received after transmission of an EOM signal.
U01046
A DCN or other inappropriate signal was received after transmission of an EOP signal.
U01047
A DCN signal was received after transmission of a PRI-EOP signal.
U01048
A DCN signal was received after transmission of a CNC signal (between units of our
U01049
make).
A DCN signal was received after transmission of a CTC signal (ECM).
U01050
A DCN signal was received after transmission of an EOR.Q signal (ECM).
U01051
A DCN signal was received after transmission of an RR signal (ECM).
U01052
A DCN signal was received after transmission of a PPS.NULL signal (ECM).
U01053
A DCN signal was received after transmission of a PPS.MPS signal (ECM).
U01054
A DCN signal was received after transmission of a PPS.EOM signal (ECM).
U01055
A DCN signal was received after transmission of a PPS.EOP signal (ECM).
U01056
A DCN signal was received after transmission of a PPS.PRI-EOP signal (ECM).
U01057
Polarity reversal was detected during handshake.
U01070
Polarity reversal was detected during message transmission.
U01071
A break in loop current was detected during transmission.
U01072
During reverse polling in V.34 mode at the receiver unit, a CM signal was not detected
U01073
when transmitting after reception.
A PIP signal was received after transmission of a PPS.NULL signal.
U01080
During transmission in V.34 mode, communication was interrupted because a PPR sig-
U01091
nal was received over 10 times even after reducing the communication speed to the min-
imum with the symbol speed maintained at the level of connection.
During transmission in V.34 mode, communication was interrupted because of an impos-
U01092
sible combination of the symbol speed and communication speed.
Description
1-4-40
2MH/2MJ/2MK/2ML