Kyocera FS-1030MPF Service Manual page 83

Item No.
U917 Error Codes
Codes
d000
d001
d002
d003
d004
d005
d006
d007
d008
d009
d00a
Supplement
The following restrictions apply to the data which were imported from 4 in 1 model (with FAX) to
3 in 1 model (without FAX).
Personal address book: FAX-related data are not imported.
Group address book: Group addresses including FAX addresses are not imported.
Job accounting data: Initial values are added for FAX-related data.
One-touch data: Groups assigned with FAX addresses or those including FAX are not imported.
User management data: Initial values are added for out-going FAXes of authentication.
Program data: Not imported. (The same applies when data are imported from 3 in 1 to 4 in 1
model.)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Clearing the all copy counts and machine life counts (one time only)
U927
Description
Resets all of the counts back to zero.
Supplement
The total account counter and the machine life counter can be cleared only once if all count val-
ues are 1000 or less.
Method
1. Press the start key.
2. Press [EXECUTE].
3. Press the start key. All copy counts and machine life counts are cleared.
[CAN NOT EXECUTE] is displayed if the count cannot be cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Unspecified error
HDD unavailable
USB memory is not inserted
File for writing is not found in the USB
File for reading is not found in the HDD
USB error in writing
USB error in reading
USB unmount error
File rename error
File open error
File close error
Description
Codes
d00b
d00c
d00d
d00e
d00f
d010
d011
d012
d013
d014
d015
1-3-52
2MH/2MJ/2MK/2ML
Description
File reading error
File writing error
File copy error
File compressed error
File decompressed error
Directory open error
Directory creation error
File writing error
File reading error
File deletion error
File copy error to the USB