To Replenish Ink, Set A New Ink Cartridge In The Ink Station - MIMAKI UJF-605C Operation Manual

To replenish ink, set a new ink cartridge in the ink station

If ink in the cartridge comes to an empty, the corresponding message appears.
Printing can be continued but ink may run out during printing.
Immediately put a new ink cartridge.
• In case [NEAR END] is indicated on the LCD, replace a ink cartridge
• When installing an ink cartridge, hold it laterally with the side containing the
< When the amount of ink becomes small during printing >
Indicate the ink color which has run out.
The display at right indicates that black ink
comes to an end.
STEPS:
1. Either of the messages shown above is
displayed on the LCD during printing.
2. Install a new ink cartridge.
Pull out the ink cartridge of the indicated color and
then set a new ink cartridge.
3. Press the [REMOTE] key to execute the
REMOTE mode.
Continuous printing is available.
immediately.
IC chip upward.
- 2-27 -
<<LOCAL>> NEAR END
COLOR :K
<<LOCAL>> NEAR END
COLOR :K