Table of Contents
Advertisement
Ink cartridge
Replacing with a new ink cartridge
Replacing of ink cartridges is required in the following cases.
Display
< L O C A L >
I N K
N E N D
< L O C A L >
I N K
E N D
1
Press the
2
Select the [MAINTENANCE] by pressing the
key, and press the
3
Select the [STATION] by pressing the
key, and press the
4
Select the [EXCH CARTRIDGE] by pressing the
or
• Y-bar moves to the front.
5
Remove an ink cartridge to be replaced.
6
Set a new ink cartridge
• As shown in the drawing, set an ink cartridge turning up a side
containing the IC chip.
7
After replacing, press the
• Y-bar returns to the back.
8
Press the
4-4
The ink in the ink cartridge is low.
?Drawing can be continued, but the ink may end during the drawing. Early
M _ _ _ _ _
replacement is recommended.
?The display shown in the left indicates that magenta ink is low.
The ink in the ink cartridge ended.
?Unable to continue drawing. Replace with a new one immediately.
M _ _ _ _ _
?The display shown in the left indicates that magenta ink ended.
key in the local mode.
FUNCTION
ENTER
key.
ENTER
key, and press the
ENTER
key to finish.
END
Outline
or
key.
or
key.
ENTER
key.
< L O C A L >
F U N C T I O N
M A I N T E N A N C E
< E N T >
M A I N T E N A N C E
S T A T I O N
< e n t >
S T A T I O N
M E N T
: E X C H C A R T R I D G E
IC chip
S T A T I O N
C O M P L E T E D
: e n t
Advertisement
Table of Contents
