Regular Wiping Function [Int. Wiping] - MIMAKI UJF-605C Operation Manual

Regular wiping function [INT. WIPING]

Use this function to prevent the ink spray on the print head surface.
This function enables to wipe off the condensed ink as wiping the nozzle at intervals after
specified number of plotting.
STEPS:
1. Select the [INT. WIPING] from the [MAIN-
TENANCE]. (
2. Press the [ENTER] key.
3. Press the [ ] or [ ] keys to select the
maintenance interval. (SCAN CNT, PRINT
CNT)
• [PRINT COUNT] cleans the nozzle
surface at the end of printing if it
exceeded the set number of scans
(100 to 800 times).
• [PRINT COUNT] cleans the nozzle
surface per the set number of printings
(1 to 4 times).
4. Press the [ENTER] key.
6. Press the [ ] or [ ] keys to set the number
of times.
Setting value:
SCAN CNT: 100 to 800(In 100 unit)
PRINT CNT: 1 to 4
7. Press the [ENTER] key.
8. Press the [END] key twice, and the device
returns to the LOCAL mode.
P.5-2)
- 5-8 -
MAINTENANCE
INT. WIPING
INT. WIPING
INT. :PRINT CNT
INT. WIPING
INT. :SCAN CNT
INT. WIPING
SCAN CNT
INT. WIPING
SCAN CNT
MAINTENANCE
INT. WIPING
<< LOCAL >>
< ent>
: 100
: 200
< ent>