Canon imagePROGRAF iPF5000 Series Service Manual page 111

m) Upper rear cover
Removing the upper rear cover
1) When removing the upper rear cover[2], open the top cover,left circle cover, tank cover, right circle cover, right upper cover, operation panel, mist filter, filter
cover, filter, right cover, and rear lower cover.
2) Remove the three screws[1], and then remove the upper rear cover[2].
n) Upper front cover
Removing the upper front cover
1) When removing the upper front cover[3],open the top cover, left circle cover, tank cover, right circle cover, right upper cover, and operation panel.
2) Remove the two screws[1],and then remove the upper front cover while releasing the three hooks[2].
o) Lower front cover
Removing the lower front cover
1) When removing the lower front cover[3], open the top cover, left circle cover, tank cover, right circle cover, right upper cover, operation panel, and upper front
cover.
2) Remove the screw[1], and then remove the lower front cover[2].
[1]
[2]
F-4-21
[1]
[1] [2]
F-4-22
[1]
[2]
F-4-23
[1]
[3]
Chapter 4
4-9