Service Tools; Tool List - Canon imagePROGRAF iPF5000 Series Service Manual

File transfer route:
USB, IEEE1394, network
2. L Printer Service Tool
Procedure
1) Start L Printer Service Tool.
2) Place the printer in the online mode.
3) Specify the firmware file(jdl) and then transfer it.
4) The data shown on the LCD on the operation panel changes and the firmware is updated automatically.
5) When firmware update is completed, the printer will start again.
File transfer route:
USB, IEEE1394, network (directly connected using a cross cable)

6.4 Service Tools

6.4.1 Tool List

General-purpose tools
Long Phillips screwdriver
Phillips screwdriver
Flat-head screwdriver
Needle-nose pliers
Hex key wrench
Flat brush
Lint free paper
Rubber gloves
Special-purpose tools
Grease MOLYKOTE PG-641
(CK-0562-000)
T-6-46
Application
Inserting and removing screws
Inserting and removing screws
Removing the E-ring
Inserting and removing the spring parts
Inserting and removing hexagonal screws
Applying grease
Wiping off ink
Preventing ink stains
T-6-47
Application
Applying to specified locations
Chapter 6
0013-4006
6-23