Canon imagePROGRAF iPF5000 Series Service Manual page 94

Chapter 3
(21) Press the stopper at the top the ink tank lock lever,and then open the ink tank lock lever upward.
(22) Before unpacking the ink tank you want to install,shake it slowly 7-8 times.
(23) Open the package and take out the ink tank by holding its knobs.
- Never touch the ink port[1] and contacts[2]. The peripheral parts may be stained,the ink tank may be broken, or a printing failure may occur.
- Becareful not to drop the ink tank once it is unpacked . THe leaked ink may stain the peripheral area.
- Do not remove and shake th eink once it is installed. Ink may spatter.
(24) Install the ink tank in the holder with the ink port facing down as shown.
3-6
F-3-23
F-3-24
F-3-25
[1]
[2]
F-3-26