Special Mode; Special Modes For Servicing - Canon imagePROGRAF iPF5000 Series Service Manual

Display
D-CNT 17-24
D-CNT 17
- HEAD DOT CNT.1
Displays the counts of dots of individual colors of the currently installed print head.
- HEAD DOT CNT.2
Displays the cumulative count of dots of individual colors.
- PARTS CNT.
Displays the status of the consumable parts replacement counter.
g) SETTING
Allows you to make various settings.
Display
Pth ON/OFF
RTC DATE
yyyy/mm/dd
TIME hh:mm
- INITIALIZE
The DISPLAY histories, ADJUST settings, COUNTER values, and other parameters can be cleared individually.
Display
WARNING
ERROR
ADJUST
W-INK
CARRIAGE
PURGE
INK CHECK
INK-USE CNT
CUTTER-CHG CNT
W-INK-CHG CNT
HEAD-CHG R CNT
HEAD-CHG L CNT
PARTS-CHG CNT
PARTS COUNTER

7.2 Special Mode

7.2.1 Special Modes for Servicing

This printer supports the following special modes in addition to the service mode:
- PCB replacement mode
- Download mode
1. PCB replacement mode
This mode is used when replacing the main PCB or MC relay PCB.
By executing this mode,
- Backup data of the settings and counter values stored in the MC relay PCB are moved to the new main PCB.
- The data such as the settings and counter values are copied to the MC relay PCB.
a) Entering the PCB replacement mode
Follow the same procedure as that for entering the service mode.
(With the "Paper Source" button and "Information" button pressed down, turn on the "Power" button.)
When the printer starts up, compare the serial number memorized in the main PCB's EEPROM with that memorized in the MC relay PCB's EEPROM. If they do
not match, or no serial number is memorized in either EEPROM, enter the PCB replacement mode.
While you are in the PCB replacement mode, the MESSAGE LED, roll media LED, and ONLINE LED are lit.
b) Procedure
Select "CPU BOARD" or "MC BOARD" using the [
- CPU BOARD
Select this after replacing the main PCB.
The data in the MC relay PCB is copied to the main PCB.
- MC BOARD
Description
Cumulative number of sheets of A4-equivalent paper equal to or larger than 17 inches but smaller than 24
inches (data size)
Cumulative number of sheets of A4-equivalent paper smaller than 17 inches (data size)
Description
Turns on/off the (Pth head pulse rank) control function.
Default: On
Set the RTC. The procedure is the same as in the user mode.
The initial value is 00:00, January 1, 2006.
* The display order of year, month, and day is defined in "Date Format".
Description
Initialization of DISPLAY > WARNING
Initialization of DISPLAY > ERROR
Initialization of value of fine band adjustment by user and initialization of scale adjustment value
The automatically adjusted value is not initialized.
Initialization of COUNTER > PRINTER > W-INK
Initialization of COUNTER > CARRIAGE
Initialization of COUNTER > PURGE
* The refill ink usage history cannot be initialized.
Initialization of COUNTER > INK-USE2
Initialization of COUNTER > EXCHANGE > CUTTER EXC.
Counting up of COUNTER > CLEAR
Initialization of COUNTER > EXCHANGE > MTC EXC.
Counting up of COUNTER > CLEAR
Initialization of COUNTER > EXCHANGE > HEAD R EXC.
Initialization of COUNTER > EXCHANGE > HEAD L EXC.
Initialization of COUNTER > EXCHANGE > UNIT A EXC.
Counting up of CLEAR > UNIT EXC.
Initialization of all COUNTER > PARTS CNT.
] and [ ] buttons, and then press the [OK] button to determine it.
T-7-24
T-7-25
Chapter 7
Unit
sheets
sheets
0013-2122
7-11