Basic Operation; Operation Panel - Canon imagePROGRAF iPF5000 Series Service Manual

1.6 Basic Operation

1.6.1 Operation Panel

This section explains the functions of the buttons and the meanings of the LEDs on the operation panel.
[1] Display
This display shows the printer menus, statues, and messages.
[2] Data lamp (green)
Flashing: When the printer is printing, this lamp indicates that the printer is receiving or processing a print job.
When the printer is not printing, this lamp indicates that the print job is paused or firmware data is being received.
Off: This indicates that there is no print job.
[3] Message lamp (orange)
On: This indicates that a warning message is displayed.
Flashing: This indicates that an error message is displayed.
Off: This indicates that the printer is normal or the power is turned off.
[4] Auto Feed lamp (green)
On: This indicates that the cassette or roll media is selected as the paper source.
Off: This indicates that the paper tray or thick paper feed slot is selected as the paper source.
[5] Paper Tray lamp (green)
On: This indicates that the paper tray or thick paper feed slot is selected as the paper source.
Off: This indicates that the cassette or roll media is selected as the paper source.
[6] Paper Source button
This button is used to select a paper source. Pressing this button toggles between the automatic pickup and manual feed.
The [Auto Feed] lamp or [Paper Tray] lamp goes on.
[7] Online button
This button switches between online and offline modes.
On: This indicates that the printer is in the online status.
Off: This indicates that the printer is in the offline mode.
[8] Menu button
This button displays the main menu of the printer.
[9] Information button
This button displays a submenu. Information about the ink and media each time you press this button.
Head cleaning is carried out when this button is held pressed for at least 3 seconds.
[10]
(In the menu mode)
button: Displays the next higher-level menu.
button: Displays the next lower-level menu.
button: Displays the previous item or setting.
button: Displays the next item or setting.
(In the offline mode)
button: Feeds the roll media in the reverse direction.
button: Feeds the roll media in the normal direction.
[11] OK button
[3] [2]
Data
[4]
Message
[5]
Auto Feed
[6]
Feeder
Online
Selection
[7]
Menu Information
[8]
Cleaning
(3 Sec.)
[9]
buttons
[1]
[14]
Power
[13]
OK Stop/Eject
(1 Sec.)
[12]
[10] [11]
F-1-17
Chapter 1
0013-0043
1-9