Canon imagePROGRAF iPF5000 Series Service Manual page 92

Chapter 3
(10) When the message "Open Top Cover"is displayed,open the top cover.
(11) Pull the printhead fixer lever forward to open it fully.
(12) Raise the printhead fixer cover to open it fully.
(13) Holding the knobs[1],take out the printhead from the case.
- Do not touch the nozzles[2] and contacts[3] on the printhead[1]. The printhead can damage or a printing failure can occur. Do not reattach the removed protective
caps.
- Dispose of these parts following the local regulation.
(14) Remove the orange protective cap 1[1], and then pull the protective cap 2[2] downward with the knob pressed.
3-4
OK
F-3-11
F-3-12
F-3-13
F-3-14
[1]
[1]
F-3-15
[2]
[1]
[3]
F-3-16