Canon imagePROGRAF iPF5000 Series Service Manual page 110

Chapter 4
j) Mist filter
Removing the mist filter
1) When removing the mist filter[2], open the top cover,and then remove the right circle.
2) Removing the screw[1], and then remove the mist filter[2].
k) Right cover
Removing the right cover
1) When removing the right cover[2], open the top cover, and then remove the right circle cover, right upper cover, operation panel, mist filter, filter cover, filter,
and lower rear cover.
2) Remove the five screws[1] and hook[A], and then remove the right cover[2].
l) Right front cover
Removing the right front cover
1) When removing the right front cover[2], open the top cover, output tray unit, right circle cover, operation panel, mist filter, filter cover, filter, and right cover.
2) Remove the two screws[1], and then remove the right front cover[2].
4-8
F-4-18
F-4-19
[2]
[1]
[A]
F-4-20
[1]
[2]
[1]
[1]