Inspire SCS-202 Assembly And Operation Manual page 9

Weight Rack mounting tabs
Main Upright
Step 2
4 – M10 x 105 Hex Bolts
8 – M10 Flat Washers
4 – M10 Locknuts
Step 2: Attach two Main Uprights to the rear of the Left and Right
Right Base Beams (orient all Uprights with the four Weight
Rack mounting tabs toward the middle of the machine
and near the top) using:
(Finger Tighten Only)
Page 6
Four (M10 x 105 Hex Bolts)
Eight (M10 Flat Washers)
Four (M10 Locknuts)