Inspire SCS-202 Assembly And Operation Manual page 17

Step 14
4 - M10 x 45 Hex Bolts
8 - M10 Flat Washers
4 - M10 Locknuts
Step 14: Install the two Weight Stack Shroud Mounts. One at a time,
position the Weight Stack Shroud Mounts at the top of the
Guide Rod pairs. Slide these down the Guide Rods and
secure in position using:
(Wrench Tighten Steps 12 And 14 Now)
Page 14
Weight Stack Shroud Mounts
Four (M10 x 45 Hex Bolts)
Eight (M10 Flat Washers)
Four (M10 Locknuts)