Important Safety Instructions; Tools Required - Inspire SCS-202 Assembly And Operation Manual

IMPORTANT SAFETY INSTRUCTIONS

Please read this entire manual and familiarize yourself with all decals and
warnings before using this Smith Cage System.
• WARNING! It is necessary to inspect this Smith Cage System regularly
to maintain safety and proper function. Please use the maintenance
schedule included towards the back of this manual. Immediately replace
any and all defective or worn parts. Pay special attention to moving parts
and connections to accessories. See General Maintenance section for
complete details.
• Use this Smith Cage System for its intended purpose as described in this
Operation Manual or the exercise chart. Do not use attachments not
recommended by the manufacturer.
• Make sure bystanders are at least 5 feet away from the
Smith Cage System while it is in use.
• Keep children off the Smith Cage System at all times.
• Keep the Smith Cage System away from walls and clear of any
obstructions and furniture.
• Stop immediately if you experience shortness of breath, pain, or dizziness
during your workout. Inspire Fitness strongly recommends consulting your
doctor before starting an exercise program.
TOOLS REQUIRED FOR ASSEMBLY
• Metric socket set (including 13mm, 16mm, 17mm, 18mm, and 19mm
sockets)
• Metric Wrenches – 13mm, 16mm, 17mm, 18mm, 19mm
• Metric Tape Measure
• Rubber Mallet
• Adjustable Wrench
• 3mm, 4mm, 5mm, and 6mm Hex Wrenches
Page 1