Figure 2-2 Vehicle Battery Cable Jacket - Intermec 6820 User Manual

Installation
Stripping the Vehicle Battery Cable Jacket
Do the following to strip the gray vehicle battery cable jack-
et and insulation:
1. Cut the gray battery cable near the battery to avoid
2. Strip the battery cable jacket (gray) back 12–14 inches
3. Strip 1/4" (6 mm) of insulation from the black (or
Gray Battery Cable
2-6 6820 Printer User's Guide
coiling or tying excess cable.
(31–36 centimeters).
brown) and red wires.
Red Wire
Black (or Brown) Wire
Figure 2-2
Vehicle Battery Cable Jacket
# "
Strip each wire end
1/4 inch (6 mm)
Strip the Cable Jacket
12–14 inches
(31–36 centimeters)
SECTION 2