Wall Mount Printer; Loading The Flat Paper Tray; Loading The Compact Paper Tray; Figure 3-5 Loading Compact Paper Tray - Intermec 6820 User Manual

Operation

Wall Mount Printer

The wall mount printer can load paper from either an op-
tional flat paper tray or an optional compact paper tray.

Loading the Flat Paper Tray

If you have a flat paper tray attached to the wall mount
printer, hold a stack of paper, up to 2.5 inches (6 cm) thick,
with the original facing you, and lay the stack flat into the
tray. Pull the top form out to load into the printer.

Loading the Compact Paper Tray

If you have a compact paper tray attached to the wall
mount printer, do the following to load paper into that tray:
1. With the original facing you, hold a stack of paper, up
2. Simultaneously lower the paper into the compact pa-
3. Pull the top form out to load into the printer.
3-10 6820 Printer User's Guide
to 2.5 inches (6 cm) thick, vertically over the compact
paper tray.
per tray and pull up the bottom end of the paper until
the entire stack fits, like a "U," inside the compact
paper tray.
Figure 3-5
Loading Compact Paper Tray
SECTION 3