Figure 5-1 Print Head To Far Left; Printer Mechanism Alignment - Intermec 6820 User Manual

Troubleshooting

Printer Mechanism Alignment

If head jams are occurring, the alignment of the printer
mechanism may need correction.
Open the printer top cover, then install a ribbon cartridge
(see page 3-4) and position the print head to the far left to-
ward the green thumb wheel. Observe the area between
the print head and the printer cavity (circled in Figure 5-1
below). If the ribbon cartridge touches the pivot frame or
press nut, the printer mechanism needs realignment.
1
2
" NOTE:
The print head replacement is sold separately. See "Inside Sales" in
Section 1 for ordering information and part number.
5-12 6820 Printer User's Guide
1. Press nut
2. Pivot frame
Figure 5-1
Print Head to Far Left
SECTION 5