Figure 3-6 Putting Paper Into Pinfeed Holders; Loading Paper Into Printer - Intermec 6820 User Manual

SECTION 3

Loading Paper into Printer

B CAUTION:
Follow these steps to load the paper into the printer, or paper
jams may occur.
Paper for the 6820 Printer has perforated strips that fit
onto the pinfeed holder pins, guiding the paper into the
printer. This paper is sold separately in 1-, 2-, or 3-ply
forms. See "Inside Sales" in Section 1 for ordering informa-
tion and part numbers.
Positioning the Paper
1. Open the pinfeed holders outward.
2. Take the top edge of the sheet of paper and position it,
3. Align the first few holes of the paper, on each side of
4. Close the pinfeed holders.
5. Raise the paper bail.
" NOTE:
Go to the next page to adjust the pinfeed holders.
original side facing down, over the pinfeed holder pins.
the paper, onto the pinfeed holder pins.
Figure 3-6
Putting Paper into Pinfeed Holders
Operation
6820 Printer User's Guide 3-11