Installation Of The Peer-To-Peer Utility For Tcp/Ip; Peer-To-Peer Utility Settings - Sharp AR-P13 Service Manual

4.2.3

Installation of the Peer-to-peer Utility for TCP/IP

(1) Insert the CD-ROM into the CD-ROM drive.
• The menu screen appears.
(2) Click on the [Setup Utilities].
(3) Click on the [IP Peer-to-Peer capability software Setup] button.
(4) Click on the [Setup] button.
• The setup program starts.
(5) Click on [Next].
(6) Installation Notes are displayed.
(7) Click on [Yes].
(8) If necessary, change the folder for the files to be installed, then click on the [Next] button.
(9) Click on [Next].
(10) The files are installed.
(11) The completion message is displayed.
(12) Click on [OK].
SUPPLEMENT:
After the Peer-to-Peer utility for TCP/IP is installed, "IP-P2P" is added to the Start Menu.
4.3

Peer-to-peer Utility Settings

When the Peer-to-Peer utility has been installed, the peer-to-peer utility port is added to [Print to the following port] in the
printer property. Then the peer-to-peer utility port can be selected. The default name of the port is "SHA_XXXXXX". (XXXXXX
indicates a serial number of the Print Server Card.)
When installing the printer driver, select this port for [Print to the following port].
SUPPLEMENT:
• If a port for the Peer-to-Peer utility cannot be added automatically, restart the computer.
• When using the Peer-to-Peer utility for IPX/SPX, and if a port cannot be added even when
the computer is restarted, use the Peer-to-Peer utility for TCP/IP.
4-28