Sharp AR-P13 Service Manual page 47

Submenu
TCP/IP SETUP Subnet Mask
Gateway Address
Peer To Peer Port No.
Administrator Password
SETUP
BACK
NetWare SETUP Set the NetWare for this machine.
NetWare
Print Server Name
Preferred File Server
Preferred NDS Context
Preferred NDS Tree
Print Queue Scan Rate
Bindery Mode
Administrator Password
SETUP
BACK
AppleTalk SETUP Set the AppleTalk for this machine.
AppleTalk SETUP
Printer Name
Zone Name
SETUP
BACK
Test Print Printout the reports about this machine.
Setting List
Font List
Device Status Log
Print Log
PCL Test
PDL Test
Items
Enter the subnet mask. 255.255.255.255 and 0.0.0.0 cannot be set for
the subnet mask.
Enter the router address when using a router in network.
Using the default setting is recommended in general.
Enter the administrator password. The password described with "∗".
Set up the entered information as the conclusion. Hardware resetting is
necessary to be performed for the settings to be effective.
Return to Administrator menu.
Effective NetWare and IPX/SPX protocol.
Enter the print server name.
Set this only when setting is performed in the bindery mode.
Entering the preferred file server name. When starting Print Server Card,
connect to the preferred file server without auto-searching for file servers.
Set this only when setting is performed in the NDS mode.
Enter the context for a print server.
Set this only when setting is performed in the NDS mode.
Enter the directories where the print server is located.
Set the time interval for the print server to scan the print queues in the
range of 1 to 255 seconds.
Set "Disable" the bindery mode to be ineffective.
Enter the administrator password. The password described with "∗".
Set up the entered information as conclusion. Hardware resetting is nec-
essary to be performed for the settings to be effective.
Return to Administrator menu.
Set "Use" to use AppleTalk.
The printer name is indicated. No setting can be made.
Enter the zone in which this printer is located.
Set up the entered information as conclusion. Hardware resetting is nec-
essary to be performed for the settings to be effective.
Return to Administrator menu.
Print out the setting reports for the printer function and network.
Print out the Font list in each font that can be confirmed at the Internal
Font of the Printer Information menu.
Print out the Device Status Log that can be confirmed at the Device
status log of the Administrator menu.
Print out up to 190 print records.
Print out a sample in the PCL mode.
Print out a sample in the PDL mode.
4-16
Description