Table of Contents
Advertisement
5.3.2
Plug-and-Play
When this machine is connected to a computer in the local mode, and when the computer is turned on for the first time, this
machine can be detected automatically by the Plug-and-Play function.
The Plug-and-Play functions when the following requirements are met:
•
A computer supports the Plug-and-Play function.
•
Windows 95/98 is installed to a computer.
•
This machine is connected in the local mode (parallel mode) via a printer cable.
When the "New Hardware" dialog box appears, install the printer driver in the CD-ROM according to the instruction.
•
When the "Device Driver Wizard" dialog box appears, click on [Cancel], and install the printer driver in the normal way.
5.3.3
Installing the Printer Driver to Windows 95/98
(1) Insert the CD-ROM into the CD-ROM drive of the computer.
(2) Click on [Setup printer driver].
(3) Click on [Install].
(4) Click on [Add Printer].
(5) Click on [Next].
(6) Select the way of connection (local or network) between the printer and your computer.
•
When selecting "Local printer", go to Step 13.
(7) Click on [Next].
(8) Input the network path or network queue name of this printer in the field of [Network path or queue name].
•
Select whether or not printing is performed through MS-DOS applications.
(9) Click on the [Browse].
(10) Click on the network printer to highlight it, then click on the [OK].
(11) Click on [Next].
(12) Click on [Have Disk ... ].
(13) Click on [Browse] to designate the path that contains a driver to be installed in [Copy manufacture's files from].
•
Confirm how the printer drivers are organized in the "Read me first" menu screen in the CD-ROM.
(14) Click on [OK].
(15) The printer to be used in displayed.
Click on [NEXT].
•
[Network printer] is selected in Step 7: Go to Step 18.
(16) In the [Available Ports] screen, select the port to be used:
•
When the machine is connected to your computer via a printer cable:
Select "LPT1 Printer Port"
•
When the machine is connected to a peer-to-peer network:
Select the port added in "Peer-to-Peer Utility" Settings.
(17) Click on [Next].
(18) If necessary, change the [Printer name], then click on [Next].
(19) Select for a print test or not, then click on [Finish].
(20) After the printer driver is installed, click on [OK] to close the dialog box.
4-33
Advertisement
Chapters
Table of Contents
Troubleshooting
